Modular Kitchen Cost Calculator

Kitchen cost from its running length and fittings.

Your inputs

Length and rates
running ft
per running ft
per sq ft
lump sum
hob, chimney
per running ft
Adjust depth, GST and contingency
ft
%
%

Your result

Indicative
Kitchen cost
₹ 3,15,000

₹ 21,000 per running ft before appliances.

₹ 1,20,000
Cabinets
₹ 20,000
Countertop, 20 sq ft
₹ 1,00,000
Appliances
₹ 15,000
Contingency (5%)
Countertop is 10 ft long and 2 ft deep. Rates are your quotes.

Quick answer: Kitchen cost = running ft × cabinet rate + running ft × countertop depth × rate per sq ft + accessories + installation + appliances, plus contingency. A 10 ft kitchen at placeholder rates of ₹ 12,000 per running ft and ₹ 1,000 per sq ft of top comes to ₹ 3,15,000.

Kitchen cost, step by step

Updates as you type
From the kitchen length and the rates you enter.
ItemAmount
Cabinets₹ 1,20,000
Countertop₹ 20,000
Accessories and hardware₹ 50,000
Installation₹ 10,000
GST added₹ 0
Appliances₹ 1,00,000
Contingency₹ 15,000
Kitchen cost₹ 3,15,000
Per running ft, all in₹ 31,500

How do you use the modular kitchen calculator?

  1. Measure the length of the base cabinets along the walls in feet. For an L or U shape, add up each side. This is the running length most quotes use.
  2. Enter the cabinet rate per running ft from your quote, the countertop rate per sq ft, and lump sums for accessories and appliances.
  3. Read the total. Countertop depth, GST and contingency are under “Adjust depth, GST and contingency”.

How is a modular kitchen priced?

Most designers quote cabinets per running foot of kitchen length. That rate already reflects the board, shutter finish and whether wall units are included, so ask what it covers. The countertop is priced per sq ft of top, which is the length times the depth, usually around 2 ft. Accessories such as baskets, tall units and soft-close hinges, and appliances such as a hob, chimney and sink, are often quoted separately.

How the cost is worked out

1
CabinetsRunning ft × cabinet rate
2
CountertopRunning ft × depth × rate per sq ft
3
WorkSteps 1 + 2 + accessories + running ft × installation, plus GST if not quoted
4
Total(Step 3 + appliances) × (1 + contingency)

Worked example: 10 running ft

At a placeholder ₹ 12,000 per running ft, cabinets cost ₹ 1,20,000. A 10 × 2 ft countertop is 20 sq ft; at ₹ 1,000 per sq ft that is ₹ 20,000. Add ₹ 50,000 of accessories, ₹ 10,000 for installation and ₹ 1,00,000 of appliances. With 5% contingency the kitchen comes to ₹ 3,15,000, or ₹ 21,000 per running ft before appliances.

Worked example: a 16 ft U-shaped kitchen

A U shape with sides of 5, 6 and 5 ft is 16 running ft. At the same rates it comes to ₹ 4,09,500, with a 32 sq ft countertop costing ₹ 32,000.

What should you ask for in a kitchen quote?

Frequently asked questions

Multiply the running length by the cabinet rate, add the countertop at length × depth × rate per sq ft, then accessories, installation and appliances. A 10 ft kitchen at placeholder rates comes to ₹ 3,15,000 with 5% contingency. Replace the defaults with your own quotes.

It is the length of the kitchen measured along the base cabinets. For an L-shaped or U-shaped kitchen, add the length of each side. Designers price cabinets per running foot, so measuring it yourself helps you check a quote and compare two designers fairly.

Multiply the running length by the depth of the top. The calculator uses 2 ft by default, which you can change under Adjust. Add any extra pieces, such as a breakfast counter or a backsplash in the same stone, as a lump sum under accessories.

It depends on the designer. Some quote base and wall units together per running foot, others price wall units separately. Ask what the rate covers, including the board, shutter finish and hardware, and enter a rate that matches it. Comparing rates only works when they cover the same things.

Site conditions often bring small extras: plumbing or electrical changes, wall repairs or an extra accessory. The calculator adds 5% by default so the budget has some room. Raise it if your walls, plumbing or wiring need work before the units go in.

First see if your quote already includes GST. If it does not, enter the rate on the invoice under Adjust; the calculator adds it to cabinets, countertop, accessories and installation, and leaves appliances as entered. Indicative only.

Sources

Indicative estimate for planning. Final cost depends on the design, materials and the designer’s quote. For GST, indicative only.

Doing up a home in Bengaluru? Talk to an acre&key advisor.

Related calculators

The next steps most buyers take after this one.

Interior Cost Calculator
Total interior cost from a per sq ft quote or item by item, with a buffer.
Calculate →
Interior Budget Calculator
Set an interior budget you can afford before you call designers.
Calculate →
Renovation Cost Calculator
Add up the cost of redoing an existing flat, room by room.
Calculate →
Flooring Cost Calculator
Flooring material and laying cost for the area you enter.
Calculate →
Tile Calculator
Tiles and boxes for a room, priced on the boxes you buy.
Calculate →
Paint Calculator
Litres of paint and cans to buy for your walls and ceiling.
Calculate →