In Karnataka property transactions, the document commonly termed a Field Measurement Book (FMB) in neighboring states corresponds to four specific cadastral records maintained by the Survey, Settlement and Land Records Department: the Tippan (linear field measurements), the Survey Sketch (plotted boundary geometry), the Akarband (land extent and revenue assessment register), and the Form 11E Sketch (pre-mutation partition map). When purchasing a land parcel or plotted development, buyers must reconcile survey numbers, hissa notations, and exact dimensional extents across the Record of Rights, Tenancy and Crops (RTC/Pahani) against the deed schedule. A registered deed alone does not establish on-ground boundaries if parent survey sketches reflect undivided joint co-holdings.
A sale deed can describe 1,200 square feet with a straight face while the revenue record still shows the parent survey number, undivided, with a neighbour's name on the RTC. The sketch is how you see that before the token leaves your account.
What people mean by FMB in Karnataka
Field measurement book is the name used in Andhra Pradesh and Telangana for the scaled drawing of a survey number, with dimensions. Karnataka buyers get handed the same phrase by agents who worked in those states. The Survey, Settlement and Land Records department here keeps the underlying notes and the drawings under its own names.
The tippan is the field book: the linear measurements, offsets and remarks taken at settlement, and updated when a later survey is brought on record. It is numbers, not a pretty map. The survey sketch, which many private checklists also call the FMB, is the drawing made from those measurements. The shape is what you walk. The tippan is what you measure against.
The akarband is the register of extent and assessment, survey number by survey number. The RTC, still called the pahani in everyday speech, is the record of who is in possession, the extent, and the crop or the land type. A village map or atlas shows where that survey number sits among its neighbours. None of these is a substitute for another. A clean RTC with a wrong sketch is still a problem. A tidy sketch with a different area on the akarband is still a problem.
Nambiar's note on the field measurement book is one of the pages that sends buyers looking for a single download. The public name on the file will often be tippan, pakka book, atlas or 11E, not FMB. Ask for the document type the portal lists. Do not pay a typing shop for a special FMB that the department does not call by that name.
Where you get the sheets
Two official doors are the ones to use.
Bhoomi, the land-records portal, is at landrecords.karnataka.gov.in. Survey documents sit with the revenue record there. Mojini, the survey department's service for sketches and survey applications, is at bhoomojini.karnataka.gov.in. A district survey office will also take a request across the counter. The Kodagu district page of the department, which publishes the citizen services, lists issuance of an 11E sketch for pre-registration and pre-mutation transactions such as a sale, a gift or a partition, along with conversion sketches and boundary measurement.
That Kodagu page also publishes a fee table. For a sale it shows ₹2,000 up to 2 acres in an urban area, then ₹200 for every fractional acre above that, and ₹1,200 up to 2 acres in a rural area, then ₹100 per fractional acre. Treat this as a published schedule to compare with the receipt you are given in Bengaluru or Anekal. It is not a quote for your file, and a private agent's fee is a different number. If the only way to get the sketch is a UPI transfer to a personal number, stop and use the portal or the survey office.
A view copy on a portal and a certified copy are not the same paper. For a token, a certified copy, or a download that carries the department's mark and the same survey number as the RTC, is the one to keep. A screenshot from a broker's phone is not.
What to line up
Write one row before you negotiate.
| Sheet | What you copy from it | What it has to match |
|---|---|---|
| RTC (pahani) | District, taluk, hobli, village, survey number, surnoc or hissa, extent, holder | The sale deed schedule |
| Tippan | Measurements and any remark that a side was altered | The sides you can walk, and the sketch |
| Survey sketch | Shape, neighbours, dimensions as drawn | The tippan, and the ground |
| Akarband | Extent and assessment for that survey number | The RTC extent |
| Form 11E, if the sale is of a part | The carved-out piece and its boundaries | The extent in the deed, not the parent survey |
| Sale deed schedule | Survey number, boundaries, extent in the unit the deed uses | All of the above, after you convert gunta, acre and square feet with the figures written down |
North, south, east and west in the deed should name a neighbour or a road you can stand on. "Government rajakaluve" as a boundary is not a slogan. It is a drain, and it belongs in our lake-buffer checks as well as on the sketch.
If the deed sells 30 guntas out of a survey number that the RTC still shows as 1 acre and 20 guntas in one holding, you are buying a part. The sketch you need is the one that cuts that part out. A sketch of the whole survey number, with your piece shaded by hand, is not that document.
The 11E sketch, and what the High Court said about registration
The Hindu reported a High Court direction that the state change the registration portal, kaverionline.karnataka.gov.in, so that sale deeds can be uploaded without insisting on a survey sketch in Form 11E. The report describes Form 11E as the sketch for a mutation of a part extent, the kind that arises on a sale, a partition or a gift, marking the boundaries of the newly carved piece.
Read that holding narrowly. It is about the sub-registrar's power to refuse the deed for want of the sketch. It is not a finding that the sketch is useless. You can, in the cases that order covers, come away with a registered deed and still not know where your piece sits. Registration without the drawing does not prove the boundary, and it does not prove that the neighbour agrees.
Get the 11E when the sale is of a part, for yourself, before you pay. The survey department's own district page still lists that sketch as a service for pre-registration transactions. A court telling the portal to accept a deed is compatible with you refusing to buy until you have seen the cut.
Phodi, hissa, and a joint holding
A hissa is a sub-division already on the record. A surnoc is the extra notation some villages use. If either appears on the RTC, it has to appear on the sketch and in the deed. A deed that cites only the parent survey number, while the RTC has moved on to a hissa, is describing an older parcel.
Phodi is the survey that splits a holding. If four relatives still stand on one RTC and you are offered the north half, the split is not finished. Our note on online subdivision of a jointly owned A-eKhata plot is the municipal version of a similar problem: the joint record has to be cut before each person can deal with a piece. On revenue land the cut is a survey, not a line on a photocopy.
A site that is only partly in a restricted category, such as B-kharab, needs the sketch that shows the line. The part inside that line does not become the part outside it because the seller says the stones were moved. Our note on B-khata conversion records that a partial B-kharab site is dealt with on the sketch, and that the portion inside the line stays out.
The sketch does not approve the layout
A perfect tippan of agricultural land is still agricultural land. Conversion under section 95 is a separate order. Layout approval is another. Khata, whether from a city corporation or from a panchayat, is a third. Our layout checklist is the place for those three. Do not let a clean sketch talk you out of them.
The same habit applies on the south-east fringe, where a stadium headline is being used to hurry tokens. The survey number is still the survey number. How that headline relates to the land is in our Anekal stadium note.
Extent units are where quiet mistakes hide. An acre is 40 guntas. A gunta is 1,089 square feet. Write the deed's figure, the RTC's figure and the conversion in one line, and circle them if they differ by more than rounding. Do not let an agent do the conversion in his head while you watch the sketch.
The next step is to sit the tippan or survey sketch, the akarband, the RTC and the draft deed on one table, and to convert every extent into the same unit. An acre is 40 guntas and a gunta is 1,089 square feet. If the numbers differ by more than rounding, or the sketch does not match the schedule, do not pay a token until a surveyor and a lawyer have seen the same mismatch.
Checklist
Related reading
Frequently asked questions
Not quite. Buyers use FMB for the drawing with dimensions. In Karnataka the field book of measurements is the tippan, and the drawing is the survey sketch. Ask the portal for the document type it actually lists. You want both, plus the akarband.
The Hindu reported a High Court direction that the registration portal must accept sale deeds without insisting on Form 11E. That is about registration. It does not tell you where the piece you are buying begins and ends. Get the sketch for a part-sale before you pay, even if the desk cannot block the deed for want of it.
Write both figures in the same unit and see the gap. Rounding of a gunta is one thing. A deed for 30 guntas out of a survey number that has never been split is another. If you cannot explain the gap from the sketch, do not treat it as a typing error.
Use landrecords.karnataka.gov.in or bhoomojini.karnataka.gov.in, or the survey office, and keep the receipt. The Kodagu district survey page publishes a fee table for an 11E sketch, including ₹2,000 for an urban sale up to 2 acres. Compare your receipt with the schedule the office is actually applying. A personal UPI address is not that schedule.
No. The sketch shows extent and boundaries. Conversion, layout approval and khata are separate. A revenue parcel can have a perfect tippan and still be agricultural land.
The sketch and the tippan are the record you can check. A verbal shift of boundary stones is a reason to ask the survey department for a measurement, not a reason to accept the seller's tape. Pay for that measurement through the department. Do not let the seller's surveyor be the only person who holds the tape.
Paper note: This is not a survey and not a title opinion. Fees on a district page can differ from the receipt in your taluk. Have the survey department measure the site if the sheets do not match the ground. Checked 17 Nov 2026.
Sources
Checked 17 Nov 2026.
-
Department of Survey, Settlement and Land Records, Kodagu district (kodagu.nic.in). Citizen services include issuance of an 11E sketch for pre-registration and pre-mutation transactions such as a sale deed, a gift deed or a partition, conversion sketches, and boundary measurement. The published fee table for a sale shows ₹2,000 up to 2 acres in an urban area and ₹200 for every fractional acre above that, and ₹1,200 up to 2 acres in a rural area and ₹100 for every fractional acre above that. Used here as a published schedule, not as a Bengaluru quote: https://kodagu.nic.in/en/ddlr/
-
Bhoomi land records portal, Government of Karnataka: https://landrecords.karnataka.gov.in
-
Mojini, Survey, Settlement and Land Records, for survey sketches and survey applications: https://bhoomojini.karnataka.gov.in
-
The Hindu, report of a Karnataka High Court direction that the state change https://kaverionline.karnataka.gov.in so registered sale deeds can be uploaded without insisting on a survey sketch in Form 11E. The report describes Form 11E as the sketch of a part-extent mutation on a sale, partition or gift, marking the boundaries of the carved-out land: https://www.thehindu.com/news/national/karnataka/hc-directs-govt-to-make-changes-to-registration-portal/article37308482.ece
-
Nambiar, field measurement book note, the page that prompted this buyer question. We used it as evidence of the search, not as the survey manual: https://nambiarbuilders.com/blog/field-measurement-book/
-
One acre is 40 guntas, and one gunta is 1,089 square feet. This is the standard revenue conversion used to compare a deed with an RTC. The comparison still has to be done on your documents.